All necks are made from well quartered hand selected woods with your choice of tenon types (dble bolt M &T; Dovetail, etc.)  Necks have many options, most without any additional cost.  See the feature options section for details.   Neck blanks are on hand to produce whatever scale length, width and side taper you might need!   Simply make the request on the neck  inquiry form for a no obligation quote via return email.     Neck Blocks and Truss Rods are normally included in pricing quotes.

Scarf Heel Maple and Ebony Slot Head Seven Piece Cocobolo Center

Neck Product Descriptions follow... but you can also look over an album of neck design ideas to get a sense of the range of offerings.

Two and Three Piece Tiger Maples Five Piece Maple; Bloodwood/ebony Center

Multi Wood Laminated Necks  Five Piece Necks:

If a single piece neck just seems too "plain" for your custom guitar, consider adding some feature such as this tiger maple center stripe bordered with ebony, both sandwiched between split Honduran mahogany.      Neck block, all hardware and two way truss rod are also included.
There are many wood combinations possible.  Here is a 5 piece Mahogany with walnut center flanked with maple pins.    Also  you might consider a Mahogany with  black limba center bordered in rosewood.

The primary wood can also be changed.   The necks to the right are a 5 piece black walnut with center stripe of mahogany bordered with ebony, followed by a 5 piece red tiger maple version with a triple ebony/maple/ebony center line feature.

Multi Wood Laminated Necks Seven Piece Necks:

More elaborate combinations are seen here in this rare seven piece flame black walnut with purpleheart center flanked with maple and ebony.
Or wider stripes can also be specified! Far right shows a seven piece mahogany with bloodwood center, flanked by 1/42" maple pins and 1/4" rosewood adjacent to the mahogany.

Single Piece Necks Honduras Mahogany and Spanish Cedar:

Widely acknowledged as the best all around material for guitar necks, a Honduran neck is light weight, elegant and economical.   It is the most popular of all necks for good reasons.  The mahogany grain structures are very stable due to its interlaced grains.   And, only Spanish cedar makes a lighter weight neck.
But, Spanish Cedar or "Cedro" can produce a beautiful and strong neck. Here are a pair of multi woods, mahogany  (above) and Spanish Cedar (below) for the visual comparison.

Special Request Necks  Unusual Woods; Two and Three Piece Necks Ukulele, Mandolin and others:

All Koa wood split and reverse book matched neck here was by special request. Also, a scarfed heel treatment is available as in this mahogany and black walnut combo with tiger maple center stripe.  These were all customer defined pieces.  Quotes available on request!	Fancy Koa with ebony/maple center Walnut Scarf with Maple Center
And of course, there's the jumping flea or Ukulele neck!	Three Piece Tiger Maple with Ebony Center Concert Ukulele Neck