Customer changes mind; his loss is your gain!
Here
are two exceptional single piece Honduras Mahogany necks which are being offered at a good discount. These flawless
necks have perfect grain structure and great color- check out the specs as one may be just what you were looking for:
Neck #1:
Specifications Neck #1
25.4 Scale; 14 fret to the joint; Neck
for Dreadnaught;
1.8" width at the nut;
2 1/4" width at the joint; 1 1/2 degree neck angle; 1/2" thick head plate x 7" length;Gibson style heel 3 13/16"
long; Contoured Volute; CF Martin two way truss rod new style included; access from the sound hole by 5MM hex;Double bolt
on type straight tenon, Complete with neck block and all hardware. SORRY,
NECK #1 WAS SOLD
Neck #2:
Specifications Neck #2:
Same as above except intended for a Cut Away
Guitar with maximum heel length of 3 15/32"; Truss rod access is from the head plate side. Otherwise,
all other specs are the same. Sorry Sold
Either Offered at $110 plus postage! Sold, Sorry
Email: sales@hanalei-moon.com to inquire or make purchase.
We've
recently added limited pin striping supplies as a raw material offering.
Here
are some pure black and white 30 mil fiber panels. Each panel comes as a 4" x 36" strip.
These can be used for center stripe laminates in necks
and can be readily glued into strips for purflings or rosette accents. The product is very dense producing crisp, clean
lines and it bonds readily using normal luthiers wood glue.
Offered at $9.00 per panel, this is a significant reduction from regular luthier's supply house rates.
==============================================================================================
Still available are the following:
Tiger Maple with Bloodwood Center stripe
flanked with 1/42" maple and black walnut pins. Some heartwood shows at the outboard edge top of the head
plate area.
Other:
Honduras Mahogany 3 Ply (on left below) with single Ebony center pin; Head stock is wide
3.5" but slightly short at 6 1/4". With matching neck block, truss rod and all hardware included for $110
plus postage. Sold, Sorry
If Interested, please contact chris@hanalei-moon.com
or call 973-775-3557!
Heel (Neck) and Tail Block Materials
We have lots of Honduran Mahogany Neck block materials. These are 1 1/8" finished both sides and minimum
of 4" wide boards of various lengths. Priced at $2 per neck block (3" wide) or $.67 per lineal inch plus postage.
Minimum order of 10 blocks.
We
also are offering some fancy neck and tail block materials 5 and 7 ply laminates just in case someone looks inside your prize
guitar! These are mostly mahogany, tiger maple and some black walnut, all with various center stripe treaments.
While supplies last, you can pick up anything you see here for $1.00 per lineal inch plus postage. Minimum order equivalent of six blocks for this type.
Same process
for ordering these applies, email or by phone to discuss the particular pieces you'd like.
973-775-3557.
