


All our necks are made from quarter sawn hand selected woods and are either mortise and tenon bolt-on type or
sliding dovetail if requested. Necks are provided either slotted for steel string truss rods and carbon fiber inserts
or unslotted for some classical guitars.
Blanks are on hand to produce whatever scale length, width and
side taper you might need, but the
Pricing remains the same. Simply make the request on the form below for a no
obligation quote via return email.
Multi Wood Laminated Necks
Five Piece Necks:
If a plain neck just seems too "plain", consider adding some feature such as this tiger maple center
stripe bordered with ebony, both sandwiched between split Honduran mahogany.
Neck block, all hardware and two way truss rod
are also included. Below is the same neck designed with walnut center strip bordered on each side with maple.
Numerous choices of hard woods are possible such as this 5 piece mahogany with black limba center bordered
in rosewood.
The primary wood can also be changed. The necks below are a 5 piece black walnut
with center stripe of mahogany bordered with ebony, followed by a 5 piece red tiger maple version with
a triple ebony/maple/ebony centerline feature.
More elaborate
combinations are seen below in this flame black walnut with purpleheart center flanked with maple and ebony.
Or wider stripes can also be specified! Here below is a mahogany
7 piece with bloodwood center, flanked by 1/42" maple pins and 1/4" rosewood adjacent to the mahogany.
Honduran Mahogany Single Piece Necks
Widely acknowledged as the best all around material for guitar necks, a Honduran neck is light weight,
elegant and economical. It is the most popular of all necks for good reasons. The mahogany grain structures
are very stable due to its interlaced grains. And, only Spanish cedar makes a lighter weight neck.

Special Request Necks
All Koa wood split and reverse book matched neck here was by
special request. Also, a scarfed heel treatment is available as in this mahogany and black walnut combo with tiger maple center
stripe. These were all customer defined pieces. Quotes available on request!
Here
below is a simple 3 piece tiger maple with 1/4" ebony center stripe.
Click Here for:
Which will
be treated as an inquiry only. If you decide to later order, we'll use this information to build your neck.
Any other questions can be emailed to us at: sales@hanalei-moon.com